64
Detect IP – Enable / Disable:
Select to enable or disable this function.
IP Address:
The IP address or URL of the PC which installed the recording software.
Detection Interval:
The interval time of the detection.
When Dis-connected:
After enable the check box of “Record Video into SD Card”,
when the network connection of PC is disconnected, it will save the video into local
SD card.
Note:
When this event is happen, the frame rate of live video and recorded video will
be limited to 5FPS. The longest continue record period of single video file is 20
minutes, and the interval of two video files is fixed with 1 minute.
Digital Image Stabilizer
Select to enable or disable this function. This function is used to reduce blurring
associated with the motion of a camera during exposure. When the vibration is
detected, the CMOS sensor assigns a 5% marginal area for vibration compensation.
This area assures the whole image captured completely.
After set up, click [Apply] to save the settings.
Содержание CAM6923F
