![Asoni CAM661H Скачать руководство пользователя страница 6](http://html1.mh-extra.com/html/asoni/cam661h/cam661h_user-manual_2984622006.webp)
5
3. Product Installation
A. Hardware Installation
Cable Connections
Power Jack:
To connect the DC 12V power adapter.
Network Connector:
The RJ-45 connector allows connect to the Ethernet network.
Micro-SD Card Slot
(inside of the camera):
Insert a Micro-SD card if you want to do the event recording in
the camera.
1. Connect Ethernet cable for network connection.
2. Connect power adapter to turn on the camera.
3. If the camera is PoE model, the power adapter is not necessary. The camera will get
the power from the PoE injector or PoE switch.
PoE (Power over Ethernet) is a technology that integrates power into a standard LAN
infrastructure. It enables power to be provided to the network device, such as an IP
phone or a network camera, using the same cable as that used for network connection.
It eliminates the need for power outlets at the camera locations. Please follow the
below figure for the connection.
PoE Switch or PoE Injector
Ethernet Cable
Data only
Ethernet Cable
Mixed data and power
PoE Network Camera
To Network
Power Jack
Network Connector
Micro-SD Card Slot (Inside of camera)
Содержание CAM661H
