68
This camera automatically grouping the first 16 presets stored in it into 4 groups (1 ~ 4).
The 4 groups can run separately, at their own speed and dwell length per group.
In the sub-menu there is of 4 groups. Each has its own selection of speed and dwell, and
you may run or stop one of these four alone.
Tour Scan
This function allows you to select and run the 4 groups in different combinations.
In each Group in the list, you may choose to turn it on or off. You may also redefine the
speed and dwell length, or skip them. Once the selection is done, press RUN on menu to
start the journey.
Patrol
Patrol is defined as the scanning to selected presets (among 1 to 32). To organize the
route, go through all the 32 presets one by one with decision of ON or OFF. Then choose
the speed and dwell length for all the stops. Activate the function with RUN command on
list.
Pattern
Pattern is a function allows you create specific path with individually-defined stops,
corresponding dwell and zoom position for continuous monitoring by auto-running. This
camera provides 4 sets of pattern.
Start by selecting a number, click
to enter the sub-menu.
Record
To make record for a moving pattern.
Move lens to the starting position and adjust lens to grab the target. At this point
record does NOT begin. To start the recording, click
button, you will see the message on screen,
meaning that camera is ready for pattern recording.
You have maximum 600 seconds or 800 movements for
one pattern. Time starts counting down right after you
enter the page.
To finish and quit the setting, click
again.
TIME: 600
CODE: 800
PRESET 1: STOP
Содержание CAM647
Страница 12: ...11 Relay Output COM Common pin N O Normally Open Max 1A 24VDC or 0 5A 125VAC...
Страница 13: ...12 C Monitor Setting 1 Right Click on the desktop Select Properties 2 Change color quality to Highest 32bit...
Страница 17: ...16 1 2 3 4 5 When popup the following dialogue box click Yes...
Страница 37: ...36 C Network Setting Network Setting Network Setting...
