53
7. Factory Default
To recover the default password and other settings, please follow the steps:
1. Power off this device.
2. Release the 4 screws on the rear panel, and then remove the rear panel.
3. Use a screw driver to push the "Factory Default Button", keeping push it and don't
release.
4. Power on the device. Don’t release the button during the system booting.
5. It will take around 30 seconds to boot the device.
6. Release the button when the device finishes proceed.
7. Re-login the device using the default username (admin) and password (admin).
8. The IP address is probably restored to the default, in this case, use IP Search
utility to search the device. The default IP address is 192.168.1.200
Factory Default Button
Содержание CAM641
Страница 1: ...Mega Pixel H 264 CMOS Network Camera CAM641 User s Manual Date 7 20 2012 Firmware Version V1 0 32...
Страница 11: ...10 1 2 3 4 5 When popup the following dialogue box click Yes...
Страница 25: ...24 After set up click Apply to save the settings...
Страница 29: ...28 C Network Setting Network Setting Network Setting...
