31
Motion Detection
CAM413/413W allows 3 areas for detect motion. When motion is triggered, it can
send the video to specific mail address, transmit the video to remote FTP server,
trigger the digital out, and save video to local SD card.
Set the Area:
To set up or clear the motion area, click [Draw/Clear Area] button of
[Area Setting:] line. Use mouse to drag the area on the video.
Adjust the Sensitivity:
To adjust the sensitivity of detection, select the level from the
pull-down list.
Activate Motion Detection:
To activate the motion detection, enable the “Detect
Area” check box, and then select the actions when the motion is triggered.
Subject:
The subject of the E-mail.
Interval:
The interval time between multiple detections. For example, if the time set to
10 seconds, when the motion detection is triggered at time 10H:05M:10S, the next
detection will be accepted after 10H:05M:20S. The detections between 10H:05M:10S
to 10H:05M:19S will not be accepted.
Record File
There are 3 methods to record the event video in SD card or send out via E-mail, FTP:
AVI File:
The event video will be recorded as still image with AVI format. The
beginning and ending time of the file is depending on the Record Time Setting.
JPEG Files:
This option is available when set Video Format as “JPEG” in Video
Setting. When event is triggered, the camera will take a series of snapshot with JPG
format. The beginning and ending time of the snapshot is depending on the Record
Time Setting.
JPEG File:
This option is available when set Video Format as “JPEG” in Video Setting.
When event is triggered, the camera will take a snapshot with JPG format. The
interval time of the snapshots is depending on the Interval Setting.
Record Time Setting
Configure the record time for the event recording file. For example, if set “Pre Alarm”
as 3 seconds and set “Post Alarm” as 5 seconds, when motion detection is triggered
at time 10H:05M:10S, the video will be recorded from 10H:05M:07S to 10H:05M:14S.
Network Dis-connected
When the network is down, it will save the video to local SD card.
Note, this function is
only for wire connection, the Wireless connection is not available.
Содержание CAM413
Страница 1: ...Network Camera CAM413 CAM413W User s Manual Version 3 1 Date 5 22 2008...
Страница 11: ...10 3 4 5 When popup the following dialogue box click Yes...
Страница 27: ...26 UPnP Enable or disable the UPnP protocol After set up click Apply to save the settings...
Страница 31: ...30 D Event Handling Event Setting CAM413 413W supports multiple event settings Event...
