27
Set the Area:
To set up the motion area, click [Area 1], [Area 2] or [Area 3] button.
Using mouse to drag the area on the video. Click [Apply] when you finish one area
setting, and then set up another area if necessary.
Adjust the Sensitivity:
To adjust the sensitivity of detection, select the level from the
pull-down list.
Activate Motion Detection:
To activate the motion detection, enable the check box of
[Area 1:], [Area 2:] or [Area 3:], and then select the actions when the motion is
triggered.
Subject:
The subject of the E-mail.
Interval:
The interval time between multiple detections. For example, if the time set to
10 seconds, when the motion detection is triggered at time 10H:05M:10S, the next
detection will be accepted after 10H:05M:20S. The detections between 10H:05M:10S
to 10H:05M:19S will not be accepted.
Record Time Setting
Configure the record time for the event recording file. For example, if set “Pre Alarm”
as 3 seconds and set “Post Alarm” as 5 seconds, when the motion detection is
triggered at time 10H:05M:10S, the video will be recorded from 10H:05M:02S to
10H:05M:14S.
Network Dis-connected
When the network is down, it will save the video to local SD card.
Note, this function is
only for wire connection, the Wireless connection is not available.
Network IP Check
For the use of recording software, CAM412/412W supports the detection of the
connection of camera and PC. Whenever the connection is down, it records the video
to local SD card to make sure the video recording is continuous.
Note, this function is
only for wire connection, the Wireless connection is not available.
IP Check – Enable / Disable:
Select to enable or disable this function.
IP Address:
The IP address or URL of the PC which installed the recording software.
Interval:
The interval time of the detection.
IP Check – Save to SD Card:
Enable this check box will save the video to local SD
card once the network connection of PC is down.
After set up, click [Apply] to save the settings.
