5
PoE (Power over Ethernet) is a technology that integrates power into a standard LAN
infrastructure. It enables power to be provided to the network device, such as an IP
phone or a network camera, using the same cable as that used for network connection.
It eliminates the need for power outlets at the camera locations. Please follow the
below figure for the connection.
6. Set up the network configurations according to the network environment. For further
explanation, please refer to
Network Configuration
chapter.
7. After finish the configuration for the very first time, if you want to use wireless network,
plug out the Ethernet cable.
I/O Connections
Digital Input
GND
Digital Output
GND
I/O terminal connector – used in application, for e.g., motion detection, event triggering,
alarm notifications. It provides the interface to:
1 set of Digital Input (Digital In + GND) – The digital inputs for connecting devices
that can toggle between an open and closed circuit, such as PIRs, door/window
contacts, glass break detectors, etc. When a signal is received the status changes
and the input becomes active.
PoE Switch or PoE Injector
Ethernet Cable
Data only
Ethernet Cable
Mixed data and power
PoE Network Camera
To Network
Содержание CAM410
Страница 1: ...CMOS Network Camera CAM410 CAM410W CAM410 PoE User s Manual Date 11 10 2010 Firmware Version V3 2 70...
Страница 12: ...11 1 2 3 4 5 When popup the following dialogue box click Yes...
Страница 40: ...39 D Event Handling Event Setting This device supports multiple event settings Event...
