User Manual
Connect the Wii Remote with the receiver and the Wii Remote with the
Console, also connect the receiver with the Wii Nunchuk and installed the
battery according to the instructions.At this point emission end sleep
mode, to comb the key first press the transmitter, launcher wake-on-to
enter the search pattern, Status LED to 2 Flash, then wait for a connection
with sink, sink if there is any one in the wiring of status, launcher and
stay connected sink will reset identification ID and confirm to connect by
using other channels (registered), when you have completed wireless
connections through transmit and receive-side (registration), the Launcher
Status LED times. Transmitter and receiver into data transmission status.
With the transmitter press the Comb Key to awaken the transmitter, the
transmitter then will go into the search mode , the transmitter status LED
will flash 2 Hz. When the receiver is in the search mode, the receiver
connection led will flash 2 Hz. As following:
Содержание 87027-R
Страница 2: ......
