ELMON wicom 81-463
Quick Guide
3
General
The ELMON
wicom
transmission system ensures wireless communication between the moving safety contact edge on the door panel and the control unit. The two-chan-
nel transmission system consists of a receiver and a maximum of three transmitters, which are connected to each other by safe radio.
Safety instructions
Installation and start-up may only be carried out by skilled electricians. Safety rules and regulations of the electrical engineering industry and the profes-
sional association must be followed. The system must be checked for correct function in suitable intervals by qualifi ed persons for the standard-conform
design of the safety system. The check must be documented in a way that allows it to be traced at any time. We suggest an yearly battery change.
Transmitter ELMON
wicom
81-463 T
Channel 1 - 8k2 Safety Contact edge
Channel 2 - 8k2 Safety Contact edge
Teach-in button
Antenna
Battery
Receiver ELMON
wicom
81-463 R
Channel 2 - Safety Contact edge Output
Channel 1 - Safety Contact edge Output
Operating voltage
DIP switch
Teach-in button
Antenna
Application Example
1-Channel
Control Unit
Receiver
Transmitter
8k2-Safety Contact edge
2-Channel
8k2-Safety Contact edge
Control Unit
Receiver
Transmitter
Electrical Connection
Transmitter
Transmitter
CH2/8k2
CH1/ENS
CH1/SCS
Wire bridge
8k2 Safety Contact edge moving
CH2/8k2
CH1/ENS
CH1/SCS
8k2 Safety Contact edge moving
8k2 Safety Contact edge moving
3k
Control Unit
SKL open
SKL close
24V 0V
NCC
8k2
8k2
V-
V+
10-30V DC
CH2/SE2
CH1/SL
+
SL
OFF
Control Unit
SKL open
SKL close
24V 0V
NCC
8k2
8k2
V-
V+
10-30V DC
CH2/SE2
CH1/SL
8k2
8k2
NCC
+
+
SL
OFF
Receiver
Receiver
