positilt
®
Inclination Sensors PTM series
Gyro-compensated Inclination Sensors PTK series
Version 1.0.0
www.asm-sensor.com
13
Pos: 34 /Bedienungsanl eitungen/M odul e U niversal/Ü berschriften/Instandhaltung und Entsorgung U E @ 6\mod_1507630731526_78.docx @ 48417 @ 1 @ 1
4 Maintenance and disposal
Pos: 35 /Bedienungsanl eitungen/Positilt/Instandhaltung _Befestigungsel emente PTM _PT K @ 6\mod_1512398065430_78.docx @ 50156 @ 2 @ 1
4.1 Maintenance and disposal
Opening all the positilt
®
PTM and PTK sensors will cause damage and void the
warranty
•
Do not open the sensor.
•
Due to possible risk of injury by improper handling, we strongly advise against
repair attempts.
Maintenance interval
Proper maintenance comprises the visual examination of parts (e.g. integrity of housing, connectors and
cables). Maintenance intervals depend on the specific application and should be defined by the user in
dependence of operating conditions. Damaged sensors must be shut down immediately and sent to the
factory for repair.
Check sensor regularly for possible damage. The following maintenance steps are recommended:
Integrity of housing,
connector, cable
Mounting elements
PTM27
X
X
PTM29
X
X
PTK29
X
X
PTK6
X
X
PTK7
X
X
Maßnahmen
Damaged parts: Put sensor out of
service and replace damaged
parts resp. send sensor to ASM
for repair
Loose mounting parts: Screw
tight mounting parts with
recommended torque, if
applicable use bolt adhesive
Pos: 36 /Bedienungsanl eitungen/Posiwire/W S_Entsorgung @ 6\mod_1507649730932_78.docx @ 48485 @ 2 @ 1
4.2 Disposal
Disposal according to applicable government regulations.
Pos: 37 /########### Sei tenum bruch ################################### @ 0\mod_1353584168894_0.docx @ 336 @ @ 1
