20
A
A
s
s
l
l
a
a
n
n
M
M
a
a
c
c
h
h
i
i
n
n
e
e
,
,
I
I
n
n
c
c
.
.
i
i
n
n
f
f
o
o
@
@
a
a
s
s
l
l
a
a
n
n
m
m
a
a
c
c
h
h
i
i
n
n
e
e
.
.
c
c
o
o
m
m
,
,
T
T
e
e
l
l
:
:
+
+
1
1
3
3
0
0
1
1
5
5
2
2
8
8
1
1
6
6
9
9
6
6
4. SAFELY TRANSPORTING THE MACHINE
The transporting must be done by qualified personnel only.
The machine should be transported by lifting with proper equipment (The machine should
not be touching the ground during the transport).
Don’t lift the machine before making sure that lifting devices or other equipment is placed
properly under the machine.
5. INSTALING THE MACHINE
The machine should be located at least 2 feet (50 cm away) from the back wall for the full
opening of the top safety cover to the back, and to do maintenance and cleaning works
on the machine. For the required minimum free distances around the machine, see
Figure-6.
5.1. PREPARATION
5.1.1. The outer dimensions of the machine are shown in the Dimensions page in this
manual. The ground where the machine will be placed, should be even and solid enough
to bear the weight of the machine.
5.1.2. At this up-cut saw, all parts are delivered ready for use.
5.1.3. Assemble the optional conveyors, if you received it, to the right side of the machine
as shown in Figure-6.
IMPORTANT