ASL INTERCOM WMC01, Руководство пользователя

Страница: 9 / 20

WMC01
– User's Manual
U-0664-0833-WMC_User_Manual.docx
– Issue: 02 complete, approved
Page 9 of 20
3.4 Configuration (Analogue Mode)
This section describes the configuration of the WMC01 device to operate in analogue mode. For IP mode follow steps 1 to
4, then see section 3.5 Configuration (IP Mode)
1. Connect the cable between VIPEDIA-12 or INTEGRA and WMC01 as shown in Figure 2 or Figure 3 above.
2. Add VIPEDIA-12 and/or INTEGRA to the PAVA System Configuration.
System -> Rack Node -> VIPEDIA-XX, or System -> Integra Node -> INTEGRA-XX
3.
Add ‘Misc’ inputs to the VIPEDIA-12 audio inputs for each music/audio source in the system.
Audio Input X -> Add -> Misc. Input