ASL INTERCOM WMC01, Руководство пользователя

Страница: 8 / 20

WMC01
– User's Manual
U-0664-0833-WMC_User_Manual.docx
– Issue: 02 complete, approved
Page 8 of 20
3.3 Connections
Depending on the mode chosen, connect the WMC01 either
1. Directly to a spare VIPEDIA-12 audio input, or
2. Through a network connection with PoE
See Figure 2 and Figure 3 below for more information.
Figure 2 - Analogue Mode Connections
In IP Mode, two options for powering the WMC01 are available. Both require a PoE network connection
– option 1 requires
a PoE capable network switch, option 2 requires an inline PoE power injector e.g. e.g. RS Stock No.873-0737
Figure 3 - IP Mode Connections
In analogue mode, the
WMC01 is connected to
the VIPEDIA-12 using a
CAT5 cable.
During initial configuration,
Router 1 on the WMC01 is
connected to a VIPEDIA-
12 microphone input.
Once configuration is
complete, the cable is
moved to Router 2. See
section 3
“Set Up” for
more information.
1) Connect the WMC01 to
a PoE capable switch and
then connect that switch to
the same network as the
VIPEDIA-12.
2) Use an inline power
injector