ASL Document ref.: 464_FMS5_10_20_Guide.doc Part No. M0464_63 Issue 1.1
Date: 26/02/04
Page 5 of 5
In the interest of continual product development, Application Solutions Ltd reserves the right to make changes to product specification without notice or liability.
Information contained in this document is believed to be accurate, however no representation or warranty is given and Application Solutions Ltd. assumes no
liability with respect to the accuracy of such information.
Specifications
Maximum - all indicators on
75mA @ 24V DC supply (FMS5)
80mA @ 24V DC supply (FMS10)
90mA @ 24V DC supply (FMS20)
Current consumption
(24Vdc supply)
Quiescent
64mA (FMS5-20)
Dimensions (H x W x D)
300mm x 350mm x 88.5mm (excluding handle)
Top and bottom cable entry hole diameters
1 x 25mm
∅
and 2 x 20mm
∅
Rear knock-out diameters
2 x 20.5mm
∅
Fixing Holes
4 x 9mm
∅
Colour
Red. RAL3020.
Weight
5.7 kg (FMS5-10)
5.9 kg (FMS20)
Temperature Range (storage and operating)
-5
°
C to +50
°
C
Humidity Range
0% to 93% Non-condensing
EMC
EN 61000-4-3.
80MHz to 1GHz
EN61000-4-6
0.15MHz to 80MHz
ITU/R 562-3 impairment level 3.
In the close proximity to some radio frequency transmitters, the signal to
noise ratio of this system may be reduced.
If this occurs, ensure adequate system RF earthing or re-locate the
equipment or signal cables.
Full performance information available on request.
Manufacturer
Application Solutions Limited, The Riverside Centre, Railway Lane, Lewes, East Sussex, BN7 2AQ, UK
Tel: +44(0)1273 476608, Fax: +44(0)1273 478888,
E-mail:
, Web:
www.asl-audio.co.uk
This equipment is designed and manufactured in the UK by
Application Solutions Ltd to a quality system certified to the
internationally recognised quality standard: BS EN ISO 9001:
1994
Certificate number: 96-LON-AQ-041
