background image

Installation of the ASL 165 FUSION Display and Programmer and the programming of the wheelchair   
electronics should only be conducted by a specialist  with an in depth technical knowledge of the ASL 
165 FUSION Display and Programmer and the wheelchair electronics.  All testing and verification of 
the completed wheelchair equipment with the ASL 165 FUSION Display and Programmer is to ISO/
RESNA or applicable standards for the completed wheelchair, including RFI compatibility testing, is 
the sole responsibility of the wheelchair manufacturer.   

ATOM

 Technology

Powered by

 

PATENT PENDING

Adaptive Switch Laboratories, Inc.   www.asl-inc.com   PH: 800-626-8698, FX: 830-798-6221   Rev 2-2021

TOP VIEW

ASL 165 FUSION Display and Programmer*

Adaptive Switch Laboratories, Inc.                         www.asl-inc.com   

The ASL 165 FUSION Display and Programmer is warranted to be free from manufac turing 
defec ts for two years from date of purchase.

WARRANTY

This warranty shall not cover equipment modified or repaired by unauthorized personnel.  ASL cannot be held responsible for damage 
caused by incorrect installation or incorrect use of the product.  Misuse, mishandling, or storage is not covered by this warranty.  The 
foregoing express warranty is exclusive and in lieu of any other warranties of any kind, whether express or implied, including the implied 
warranties of merchantability or fitness for a particular purpose, and is the sole and exclusive remedy for any defective product. The health 
care professional is responsible for understanding the intended use of the ASL equipment and the specification and safe programming 
parameters of the chair it is going on.  The wheelchair manufacturer is responsible for testing and verification of the completed wheelchair 
equipped with the ASL 165 FUSION Display and Programmer to ISO, RESNA or other applicable standards including RFI compatibility.  RFI 
interference can impact the proper functioning of the wheelchair.  Route and secure all cables in such a way in order to prevent damage 
by crushing, cutting or snagging.  Incorrect installation, configuration, or programming could result  in unsafe set up of the wheelchair for 
the user.  ASL accepts no liability for losses of any kind which result for such conditions.  

SCAN FOR  PROGRAMMING 

INFORMATION

SECURITY MEASURES

The ASL 165 FUSION Display and Programmer is susceptible to moisture.   If moisture contac ts 
the Display and Programmer, the touch screen may not work properly.  Do not operate the ASL 
165 FUSION Display and Programmer without instruc tion. The ASL 165 Display and Programmer 
should be mounted in a secure location.  When using as a display the ASL 165 should be mounted 
so it is visible to the patient.

CONNECTOR

6 FT WIRE LENGTH

3.50”

2.13”

0.84”

* The 165 FUSION DIsplay and Programmer is to 
be used with the ASL 110 FUSION Proportional 
and Digital Head Array  

Содержание 165 FUSION

Страница 1: ...ed warranties of merchantability or fitness for a particular purpose and is the sole and exclusive remedy for any defective product The health care professional is responsible for understanding the intended use of the ASL equipment and the specification and safe programming parameters of the chair it is going on The wheelchair manufacturer is responsible for testing and verification of the complet...

Страница 2: ...own on both top and bottom circular buttons on the right side of the display This will activate the screen to begin programming WhenNextFunctionishighlighted a momentary switch activation will move through the functions programmed within a profile MAIN USER NEXT FUNCTION When Next Profile is highlighted a momentary switch activation will move through the profiles that are turned on in the chair MA...

Страница 3: ... NetEnable Changes the User Screen to R Net features for easier access Mode Reverse The Slide switch will change the how the switch responds to activation The choices are Mode and Reverse The Settings Screen will allow the Auditory beeps to be turned on and off Power Up Idle When this setting is on it will allow theFUSIONtostayoffwhenthechairisturnedon An activation of the User Switch will turn th...

Страница 4: ...tons on the Display SETTINGS RESET MORE PROGRAMMING DIAGNOSTICS RESET SETTINGS PROP CALIBRATION MAX PROP CALIBRATION MIN SET PADTYPE PAD SETTINGS SET PAD DIRECTION SET MINIMUM SPEED SETTINGS USER SETTINGS FEATURE LIST R NET ENABLED SETVEER ADJUST PERFORMANCE IF R NET IS NOT ENABLED IF R NET IS ENABLED FUSION PROGR AMMING DIAGR AM FUSION PROGR AMMING DIAGR AM For more assistance visit the 165 FUSIO...

Отзывы: