4
Customer Care Center, 1-800-898-1879, www.askona.com
See the "Settings" chapter for information on how to
switch between "Hot water On" and "Hot water O
ff
".
INSTALLING THE DRAIN HOSE
The machine is supplied with the outlet hose already
attached. The hose should be extended over a
suitable sink edge or drain pipe at a height of 24"
to 36" (610 mm to 914 mm) above the bottom of the
unit. (The lower height is preferable.) Make sure the
hose is not kinked.
24" to 36"
24" to 36"
24" to 36"
B
C
A
Drain hose can also be connected directly to the
washbasin drain via a siphon. In this case, the hose,
too, should be 24" to 36" (610 mm to 914 mm) above
the
fl
oor. Internal hose diameter should be at least
0.71" (18 mm).
See
fi
gure.
At least 0.71" (18 mm)
If the hose is extended, the internal diameter of
the coupling must not be less than ½" (12.2 mm).
Do not extend the drain hose higher than 36"
(914 mm) from the bottom of the unit.
