Handling
1. Sort the washing.
2. Turn on the main switch,
, open the washer door,
and load the textiles.
3. Putting in the detergent and conditioner.
4. Select program with the program selector knob.
5. Set the desired temperature with the temperature knob and press the appropriate option buttons.
6. Close the door and start the program by pressing the
-button. It will take a few seconds before you
hear the machine starting.
To interrupt the programme, press the
-button for three seconds. If any water remains in the machine,
run either the Drain or the Spin program. Any water will then be pumped out.
7.The programme is complete when the door can be opened with the
button.
8. When washing is finished, turn off the main power switch,
, and close the washer door.
Options (all options is not available on all machines):
Spin 800 revolutions/minute.
The normal spin speed is 1000, 1100 or 1200 revolutions/minute (long spin).
By pressing the
button, you can select a lower spin speed of 800 revolutions/minute (short spin).
No spin/ no drain
By pressing the
button, the programme will be executed without a spin and will be completed wit-
hout draining.
Super rinse
Super rinse adds extra rinses to the washing programs, see the table at page 4.
Delayed start
By pressing the
button, the machine will start 5 hours after you start the washing program.
