30
3-3. Main Spin Cycle
1) Drain
Drain set time is 1 minute.
When draining is complete, 1 minute is reduced from the overall cycle.
3) Main Spin Cycle
The main spin cycle begins after the balance spin has achieved a properly balanced load.
The r.p.m reached will vary due to the cycle and options selected.
After the spin cycle is complete, the drum will slow down to approximately 450 r.p.m.
At that point, the machine will electronically stop the motor.
If you press the Start button to pause a spin cycle, the machine will electronically stop the motor.
Spin-Drying Classification
Max. r.p.m
m
.p
.r
0
5
5
w
o
L
m
.p
.r
0
9
7
m
ui
d
e
M
m
.p
.r
0
9
9
h
gi
H
m
.p
.r
0
5
0
1
h
gi
H
ar
tx
E
2) Balance Spin
①
Balancing the laundry : The machine will tumble clockwise and counterclockwise at 45r.p.m.
During this time, the machine is calculating and trying to correct the level of unbalance in the drum
based on the data from the load on the motor.
②
The machine will try to balance the load 20 times.
Once an appropriate level of balance has been achieved, the machine will advance to the main spin.
Содержание WL6511XXLT
