12
SELECT A PROGRAM
Select the program that you wish to use
with the program selector knob. You can
select between the following programs:
1 Heavy wash (with pre-wash)
2 Normal wash
3 Light wash
4 Synthetic wash
5 Quick wash
6 Super quick wash
7 Wool wash
8 Hand wash
9 Rinse program
10 Spin
11 Drain
The table on the following page contains
more information about the programs.
SELECTING SETTINGS AND OPTIONS
You can obtain a washing program to
suit your particular wash by setting the
temperature knob and pressing the appropriate
option buttons.
Temperature
Set the desired temperature with the tempera-
ture knob. If you select C, the wash temperatu-
re will be the same as that of the incoming wa-
ter.
For certain programs, the maximum tempe-
rature is always 40°C; see the table below.
Spin
The normal spin speed is 1200 revolutions/min-
ute (long spin).
By pressing the
button, you can select a
lower spin speed of 800 revolutions/minute
(short spin).
By pressing the
button, the program will
be executed without a spin and will be comple-
ted without draining. The fabrics will thus re-
main floating in the water and will not crease.
On completion of the program, disconnect
and select either the Spin or Drain program to
drain the rinsing water from the machine.
Super rinse
Press the
button to select the Super rinse
option.
Super rinse adds extra rinses to the washing
programs; see the table.
STARTING THE PROGRAM
Close the washer door, and start the pro-
gram with the
button. It will take a
few seconds before you hear the machine star-
ting.
Interrupt the program
To interrupt the program, press the
button
for three seconds. If any water remains in the
machine, run either the Drain or the Spin pro-
gram. Any water will then be pumped out. Then
press the
button to open the door. To rest-
art: fill with new detergent, if required, and se-
lect a new program.
Alter settings during the program
Press in/out the option buttons that you wish
to alter, or turn the temperature knob to the
desired setting.
55
66
77
