14
CARE AND CLEANING
CLEANING THE LINT FILTER
The lint
fi
lter must be cleaned after each load.
1. Lift
the
fi
lter from the holder in the door.
2. Lift
the
fi
lter from the holder in the door. Open the
lint
fi
lter. Use your thumb to press on the edge as
illustrated and pull it out.
3. Use your hand or a soft cloth to remove the lint
from all sides of the
fi
lter. If necessary, use a damp
sponge and a small amount of washing-up liquid to
remove any deposits. Dry the
fi
lter thoroughly with a
towel.
NOTE!
Clean the surface of the lint (
fl
uf)
fi
lter after each
drying program.
4. Close the lint
fi
lter and put it back in the door.Close
the lint
fi
lter before closing the door.
EMPTYING THE CONDENSED WATER
CONTAINER
If you have not connected the machine to a separate
drain the condensed water container must be emptied
after each load. Remove the condensed water container,
empty out the water and replace the container.
If the condensed water container becomes full to over
fl
owing, the program is interrupted and “Over Flow”
appears on the display. Empty the container and press
the Start button to restart the program.
For connection to a separate drain, see the installation
instructions in the set of documents.
NOTE!
The dryer must not be used without the condenser unit
in place.
C
C
C
C
C
C
C
C
C
C
C
A
A
A
A
A
A
A
A
A
A
R
R
R
R
R
R
R
R
R
E
E
E
E
E
E
E
E
E
E
A
A
A
A
A
N
N
N
N
N
N
N
N
N
D
D
D
D
D
D
D
D
D
D
D
D
C
LEANING
