24
Custumer Care Center
1-800-898-1879
www.askousa.com
5
. Next you must move the plastic plugs
on the upper and lower edges of the
door. Use a flat screwdriver.
6
. Unscrew the two screws on the sides
of the door, around a quarter inch (five
millimeters), to allow the door magnet
and cover washer on the inside of the
door to be removed.
7
. Then remove the door magnet (1) and
cover washer (2).
1
2
8
. Insert the door magnet in place of the
cover washer.
The tumble dryer comes with the door
hinged on the left side. However, it is pos-
sible to change the door to be hinged on the
right.
Proceed as follows:
1
. Remove the lower front plate and undo
the three screws holding the hinge attach-
ment.
2
. Angle the lower edge of the door out to
the left while turning the hinge attachment
as indicated by the arrows.
3
. Move the hinge pin. To hinge the door on
the right side, the hinge attachment must
then be turned upside down.
4
. Then move the hinge pin in the panel’s
lower edge.
Reversing the door hinge
Hinge attachment
Hinge pin
