Asko T208H.W.U, Инструкция по эксплуатации

Страница: 23 / 48

23
Customer Care Center, 1-800-898-1879, www.askousa.com
STEP 5:
CHOOSING THE PROGRAM SETTINGS
Using the program settings, the drying programs can be further adjusted to your preferences.
Some program settings may not be available for your selected program.
Selected program settings will remain stored after the end of the drying cycle and may be changed
subsequently (except for delayed start which is not stored after the drying is complete).
Choose the program settings before pressing the START button.
When the drying program is in progress, program settings cannot be changed.
Press and hold the button under a program setting to display the information (INFO) about it.
Following are the program settings that may be selected using the buttons 1 to 6:
1. Dryness level (extra dry)
By pressing the button 1, you can choose between extra dryness levels (+, ++, +++).
Each time the button is pressed, the
Þ nal level of laundry dryness and drying time will change.
2. Anti-crease
This function pertains to what happens after the drying cycle.
By pressing the button 2, you can choose the duration of the anti-crease program from 0 hours
to 4
hours , in 1-hour steps.
3. Load
By pressing the button 3, you can choose between loads of the dryer.
Full load
Small load
Partial load
Selection of actual load a
Ű
ects the initially displayed anticipated drying time.
4. Lower drying temperature (Gentle dry)
Press the button 4 to switch the gentle dry function on (ON) or o
Ű
(OFF).
1 2 3 4 5 6
1. Dryness level (extra dry)
2. Anti-crease
3. Load
4. Lower drying temperature (gentle dry)
5. Time (timed drying)
6. Delay Start