
418670
Oven lighting
Oven lighting is activated automatically when the door is opened
(oven door switch) or when the oven is turned on. With some
models, two interior lamps are installed: one at the upper part of
the back wall, and the extra one on the middle of the right side
wall.
Oven lighting can be switched off or on if required by pressing
the (P) key
(only with control unit 2).
During the self-cleaning cycle, oven lighting is turned
off.
Defrosting (only with control unit 2)
With this operation mode, the air circulates without any heaters
operating. Only the fan is activated. This is used for slow
defrosting of frozen food.
Oven self-cleaning - PYROLYSIS
The PYROLYSIS program allows automatic cleaning of the oven
interior by employing high temperature (approx. 460°C) that
causes the grease stains and other impurities to incinerate and
thus reduces them to ashes. When the pyrolitic cleaning program
is completed and the oven has cooled down, simply wipe the
ashes from the oven cavity using a damp cloth.
Before activating the automatic pyrolitic cleaning
cycle, carefully read and observe the instructions in
the section Cleaning and Maintenance, in which correct
and safe use of this function is described!
Before activating the automatic cleaning program,
remove the grid, grease
fi
lter, spit roasting set, glass
baking trays, meat probe, and any other cookware that
is not a part of the oven equipment.
Keeping the food warm
Keeping the food warm can be used as an independent function
when you wish to reheat the already prepared / cooked dishes. It can
also be activated during baking, as in that case, the oven will retain
the temperature of 70° for three hours after the oven stops operating.
Additional functions
18
Содержание OP8621B
