Asko FN31831I, Инструкция по эксплуатации

Страница: 28 / 32

EN 28
FAULTS
Problem Cause/Solution
Some or all of the
LED lighting does
not work. Consult a service technician about LED lighting that is not working. You
may not try to repair LED lighting.
Appliance makes a
noise. • The appliance is cooled by a refrigeration system with a compressor
(and with some models, also a fan) that makes a noise. The noise level
depends on the installation of the appliance, its correct use and its
age.
• When you connect the appliance to the power supply the noise made
by the compressor or flowing refrigerant may be slightly louder. This is
not indicative of a defect, and has no effect on the service life of the
appliance. The appliance will make less noise after a while.
• The appliance may be temporarily noisier after the door has been
opened for too long or too frequently, a large quantity of fresh food has
been put in the appliance or the intensive freezing function has been
activated.
‘LL’ code shown in
the display. Child lock has been activated. See the chapter ‘Child Lock’.
‘PF’ code shown in
the display. Lengthy power failure. See the chapter ‘Power failure alarm’.
Error code E0
shown in the
display. The touch keys do not respond. Call the service centre to make an
appointment for repair work. The appliance operates in the safe mode
until it has been repaired. The appliance automatically retains the most
suitable temperature for each compartment.
Error code E1, E2
or E3 shown in the
display. A temperature sensor is defective. Call the service centre to make an
appointment for repair work. The appliance operates in the safe mode
until it has been repaired. The appliance automatically retains the most
suitable temperature for each compartment.
Error code E9
shown in the
display. • A door has been open for too long: close the door.
• If the lighting in the compartment has also stopped working then
the door sensor is defective. Call the service centre to make an
appointment for repair work. The appliance operates in the safe mode
until it has been repaired. The appliance automatically retains the most
suitable temperature for each compartment.
If you are unable to solve the problem then contact the service centre. When you do so, state the
type, model and serial number shown on the type plate or label on the inside of the appliance.