Asko DWCBI231, Руководство по эксплуатации

Страница: 9 / 28

Eco
Speed mode
2:00 Eco 2:15
58°C
START
STOP
Starting the dishwasher
Select from more programmes
Open the door and press the main power switch.
Select the programme
The main power switch
Open the door and press the main power switch. Also turn on the water
tap if it is turned off.
Select a programme
ECO wash is always pre-selected. To select another programme, press
one of the programme buttons ,
or . You can also select a
programme by pressing the navigation button or until the desired
programme is shown on the display.
Select a programme to suit the type of dishes and how dirty they are.
ECO wash
This programme is intended for cleaning normally dirty dishes and is
the most effective programme in terms of combined energy and water
consumption.
Daily wash
An effective programme for daily use for slightly dried leftovers. (This
programme is not intended for burnt food, such as on oven dishes.)
Crystal glass
This programme is intended for washing fragile glasses that have just
been used and so do not require a particularly powerful programme.
Porcelain can also be washed. See also Fragile dishes in the chapter
Loading the dishwasher.
Intensive
Programme for very dirty dishes, such as pans, casserole dishes and
oven dishes. If these dishes do not completely fill the dishwasher, you
can add plates and the like.
Quick wash
This programme is used for glasses and porcelain that is slightly dirty,
such as coffee cups.
Rinse and hold
Used to rinse dishes while you wait for the dishwasher to become fully
loaded.
Normal wash
2)
Powerful programme for daily use that can remove dried leftovers, but
is not intended for burnt food, such as on oven dishes. This programme
provides maximum rinse effect, and takes longer than Daily wash.
Sani A wash 2)
This programme is ideal to use when hygiene demands are set high.
The temperature of the main wash is 60 °C. The final rinse is 85 °C for
4 minutes.
Sani B wash
2)
Choose Sani B wash if you want a quicker programme that still fulfils
hygiene demands. The temperature of the main wash is 60 °C. The
final rinse is 85 °C for 4 minutes.
Self-cleaning
Self-cleaning programme for hygienic cleaning of the dishwasher tub,
spray arms and spray pipes.
This programme should be run (with no dishes in the machine) using
normal dishwasher detergent or citric acid. Special dishwasher cleaners
are also available on the market. For the removal of limescale deposits,
see The dishwasher tub in the chapter Care and cleaning.
START
STOP
Starting the dishwasher
Press Start/Stop until the display shows "Program started, close door".
This indicates that the dishwasher is ready to start. Close the door
properly, otherwise the dishwasher will not start.
If the dishwasher is not started or the door is not closed within 2 minutes
of the last button press, the machine switches off.
Time remaining
Once you have chosen a programme, the time the programme took
when last used is displayed.
Once you have started the dishwasher the display shows the remaining
programme time. The remaining time is updated after the water for the
final rinse has been heated.
This may differ somewhat from time to time depending on the
temperature of the water supply, the amount of dishes, the ambient
temperature and other factors.
During the first run of each programme, the remaining time displayed
can be slightly misleading, as the dishwasher is estimating the time.
When you run the programme a second time, the dishwasher will
calculate the remaining time based on the previous duration of the
programme.
0:21
Time remaining
2)
Programme button / / . The programmes pre-assigned to the programme buttons can be changed. See the chapter Settings.
9