Asko DC7774V, Руководство пользователя

Страница: 28 / 36

28
ADJUSTMENT
The programme Aut 40° Normal is controlled via temp sensor exhaust air.
The programme Aut 40° Extra is controlled via temp sensor exhaust air and a time factor.
The programme Aut 60° Normal is controlled via temp sensor exhaust air.
The programme Aut 60° Extra is controlled via temp sensor exhaust air and a time factor.
The automatic programmes end automatically when the laundry is dry.
To decide when the laundry is dry, the actual exhaust air temperature is compared against a
parameter,
P2014 for 40° programme and P2024 for 60° programme.
For Aut 40° Extra an extra drying time is additionally added according to parameter P2015.
For Aut 60° Extra an extra drying time is additionally added according to parameter P2025.
It is primarily these four parameters that are adjusted to optimise the drying processes of the
automatic programmes.
Aut 40° Normal and Aut 40° Extra are adjusted with parameter P2014 .
Aut 40° Extra is additionally adjusted with parameter P2015 (extra drying time).
Aut 60° Normal and Aut 60° Extra is adjusted with parameter P2024 .
Aut 60° Extra is additionally adjusted with parameter P2025 (extra drying time).
If it is found that the laundry does not dry suffi ciently, the parameter value is increased .
If it is found that the laundry is over-dried, long drying time, the parameter value is reduced .
Optimisation of drying processes must always take place in small steps, start by adjusting the
parameter concerned one to two units up or down. Then check the result after the next drying
process and make any further adjustment necessary.