Alternatives
Settings
Adjusting the water softener. Select a setting
depending on the hardness of the water
supply. It is important that this setting is
correct!
0/1/2/3/4/5/6/7/8/9
Water hardness
7.
See
in the chapter
For a water supply with a hardness below
6°dH (10°fH / 7°eH / 1.0 mmol/l), select 0.
The water softener is deactivated and no salt
needs to be added.
Activate this setting when using an all-in-one
detergent that contains rinse aid.
On/Off
TAB
8.
This setting reduces the rinse aid dosage
and affects how often the dishwasher's
built-in softener is regenerated.
The Super rinse function rinses the dishes an
extra two times.
On/Off
Super rinse
9.
The program time is extended and the
dishwasher uses more energy and water.
Activated in the following programs:
Intensive
Quick pro
Hygiene
Select whether the interior light is to be
switched on when the dishwasher is turned
off and the door is opened. (If
is turned
on, the interior light is always switched on
when the door is opened.)
On/Off
Interior light at
power off
10.
When Odour control is activated,
Anti-odour can be selected from the program
table.
On/Off
Odour control
11.
Any error messages.
Failure readout
12.
When contacting your service centre, you
may be asked to provide the most recent
error messages.
Restores all settings to the factory defaults.
Factory reset
13.
Select Factory reset and press
.
To exit the dishwasher's Settings menu,
select Exit and press
.
Exit
14.
28
Settings
