Sanitation wash
A program with the ability to help with most household germs
and extra dirty dishware. This program will have a high final rinse
temperature for a good drying result and germ treatment.
NOTE! Do not put in dishware that cannot stand high wash or
rinse temperatures.
Normal wash
Use to wash normally soiled dishes, such as plates, serving
dishes, cups, glasses, and so on.
Heavy wash
Program for very dirty dishes, such as pans, casserole dishes,
and oven dishes. If these dishes do not completely fill the
dishwasher, you can add plates and other dishes that can
withstand a Heavy wash to fill out the load.
Quick wash
This program is used for glasses and porcelain that is lightly
soiled, such as coffee cups.
Super Quick
Short program lasting about 15 minutes with acceptable results
for very lightly soiled dishes.
Delicate wash
If the dishes are only lightly soiled, you can select Delicate wash.
This program is intended for glasses and porcelain that have just
been used and as such do not require such a powerful program.
This program can be used for fragile dishes. Select Short dry if
you want to be especially cautious. See also the section Fragile
dishes in the chapter Loading the dishwasher.
Eco wash
Use when you want to save energy. For normally soiled dishes.
Upper half
You can use this program if you only have cups and glasses that
need washing in the upper basket. Lightly soiled dishes can also
be placed in the lower basket.
Lower half
You can use this program when you only want to wash plates
and cutlery in the lower basket. Lightly soiled dishes can also be
placed in the upper basket.
Rinse & Dry
This program consists of a rinse with heating and drying. This is
a suitable program if, for example, you plan to make jam and
want to rinse and heat clean glass jars.
Rinse & Hold
Use to rinse dishes while you wait for the dishwasher to become
fully loaded.
Selecting Options
To select an option, press one of the option buttons. The field
under the button lights when the option is activated. The available
options depend on the selected program. Once you have started
the program, the options you selected are saved for the next time
you use the same program. An exception is the Delayed start
option.
High temperature
Activate this option for improved dishwashing results. The
machine then uses a higher temperature for the main wash. This
option cannot be activated if the Time saver option is selected.
If you want to use the lower temperature, press again so that the
field under the button turns off.
You can vary the temperature as shown below:
150 °F (65 °C) / 160 °F (70 °C)
Sanitation wash:
120 °F (50 °C) / 150 °F (65 °C)
Normal wash:
140 °F (60 °C)/150 °F (65 °C)
Heavy wash:
85 °F (30 °C) / 140 °F (60 °C)
Quick wash:
85 °F (30 °C) / 140 °F (60 °C)
Super Quick:
105 °F (40 °C) / 120 °F (50 °C)
Delicate wash:
120 °F (50 °C) / 140 °F (60 °C)
Eco wash:
130 °F (55 °C) / 150 °F (65 °C)
Upper half:
130 °F (55 °C) / 150 °F (65 °C)
Lower half:
Long dry
A higher temperature in the final rinse and a longer drying phase
improves the drying result if you activate the Long dry option.
This causes a slight increase in energy consumption. This option
can be used with all programs except Time program, Rinse &
Dry and Rinse & Hold. This option cannot be activated if the Time
saver option is selected.
If you want a program with Short dry, press again so that the field
under the button turns off.
Delayed start
When you select Delayed start, the dishwasher will start 1-24
hours after you press the Start/Stop button.
1 Press the button once to activate Delayed start. Press the
button several times – or hold it in – to set the desired number
of hours.
2 Press Start/Stop and the dishwasher counts down 1 hour at
a time and starts after the selected delay.
Press and hold Start/Stop for three seconds if you want to cancel
the Delayed start option.
Customer Care Center 1-800-898-1879
www.askona.com
9
