Page 7
PR
PR
PR
PR
PROGRAMS
OGRAMS
OGRAMS
OGRAMS
OGRAMS
To select a program, simply press the program button until the program you desire displays then press Start/
Stop
. The
programs are described below. You can also change certain program features. See “Options” below.
Auto Wash
The dishwasher has sensors that detect the level of soil
on the dishes and adjust the water consumption and
temperature accordingly. You cannot adjust the
temperature or drying time with this program.
Heavy Wash (Cold, 85° – 170°/Sani F)
For the heaviest soiled loads, such as casseroles or
sauce pans.
Normal Wash (Cold, 85° – 170° F)
For normally soiled loads, such as plates, glasses,
bowls, and lightly soiled pans.
Mixed Wash
Designed to wash heavily soiled dishes in the lower
basket and lightly soiled dishes in the upper basket.
Delayed Start
This option allows you to delay starting the dishwasher
from 1/2 hour to 24 hours. Press the Menu button until
Delayed Start displays, then press Set until the number
of hours you wish to delay starting the dishwasher
displays along with a flashing clock symbol. Press Menu
then press Start/
Stop
.
To cancel Delay after you press Start/
Stop
, hold down
the Start/
Stop
button for three seconds. If you change
your mind before you press Start/Stop, continue to press
the Set button until “0.00” is displayed.
All Baskets
This option lets you set which spray arms will
function. You have three choices:
THE CONTR
THE CONTR
THE CONTR
THE CONTR
THE CONTROL P
OL P
OL P
OL P
OL PANEL
ANEL
ANEL
ANEL
ANEL
Your ASKO dishwasher has our state-of-the-art electronic control panel, as illustrated below.
OPTIONS
OPTIONS
OPTIONS
OPTIONS
OPTIONS
Once you have selected a program, you can change some of the program features by using the options (described
below). To select an option, simply press the Menu button until the option you desire displays, then press the Set
button until the desired setting displays. Press Menu to confirm your selection. You can continue to make programming
changes or press Start/
Stop
to start the program.
DISPLA
DISPLA
DISPLA
DISPLA
DISPLAY
Y
Y
Y
Y WINDO
WINDO
WINDO
WINDO
WINDOW
W
W
W
W
The display window shows the programs, options, remaining program time and fault codes. It also allows you to
access the program menus and customize the wash programs. If you select Delayed Start, the window will display the
number of hours selected. When you press Start/
Stop
, the countdown time displays.
Remaining program time
– The remaining program time is calculated by the time it took the program to run last time.
(Note: The first time you run a program, the display will display 1:00.) As the program progresses, the time remaining
displays the hour and minutes (e.g., 1:02, which means one hour and two minutes.)
OPERA
OPERA
OPERA
OPERA
OPERATING INSTR
TING INSTR
TING INSTR
TING INSTR
TING INSTRUCTIONS
UCTIONS
UCTIONS
UCTIONS
UCTIONS
Upper Basket
Washes only the upper basket
Lower Basket
Washes only the lower basket
Delicate Wash (Cold, 140° F)
For delicate items, such as fine china and crystal, that
are washed immediately after use. When using this
program, you should set the temperature to low and dry
the dishes without heat.
Quick Wash (Cold, 85° – 140° F)
For lightly soiled loads that are washed immediately
after use. This program can also be used for delicate
items, but you should set the temperature to low and
dry the dishes without heat.
Rinse and Dry (120° F)
Rinses the dishes with hot water then activates the fan
and heating element to dry them.
Rinse and Hold
To rinse dishes that you plan to wash later that day.
All Baskets
– Washes the upper basket, Safe and
Handy upper cutlery basket and the bottom baskets.
Upper Basket
– Upper Basket - Washes only the
upper basket and the Safe and Handy upper cutlery
basket.
Lower Basket
– Washes only the lower basket.
Temperature
The temperature can be changed in all programs, except
Auto wash, Rinse and Hold, and Rinse and Dry. Your
choices are: cold, 85°, 105°, 120°, 130°, 140°, 160°,
and 170° F. (Note: The Delicate and Quick wash
programs cannot be set over 140° F.) To select a
temperature, press the Menu button until Temperature
displays, then press the Set button until the desired
setting displays. Press Menu to confirm your selection.
When you select 170° F, the word “Sani” displays.
Options continued on next page...
“The Normal Wash program is used for the
energy label and based upon AHAM standard.
When testing with more heavy soil use higher
temperature alternative the Heavy Wash
program.”
Start/Stop
button
Programming
buttons
Display
w i n d o w
Program
button
P o w e r
button
