Asko D3112, Инструкция по использованию и уходу

Страница: 7 / 16

Page 7
PR PR PR PR PROGRAMS OGRAMS OGRAMS OGRAMS OGRAMS
To select a program, simply press the Program button until the indicator light behind the desired program glows. The
programs are described below:
Heavy Wash (160° F or 130° F)
For the heaviest soiled loads, such as pots, pans, casseroles, etc.
Normal Wash (130° F or 140° F)
For normally soiled loads, such as plates, glasses, bowls, and lightly
soiled pans.
Quick (85° F or 120° F)
For lightly soiled loads that are washed immediately after use. This
program is good for delicate items, such as fine china and crystal,
but you should set the temperature to low and dry the dishes without
heat.
Rinse and hold
To rinse dishes that you plan to wash later that day.
Temperature
The dishwasher has two temperature options for each wash program, as shown above. When this button
is set on the high temperature, the main wash is heated to the higher temperature for the selected
program. If it is set to low, the main wash is heated to the lower temperature. The indicator light will glow
only when the high temperature is selected.
THE CONTR THE CONTR THE CONTR THE CONTR THE CONTROL P OL P OL P OL P OL PANEL ANEL ANEL ANEL ANEL
Your ASKO dishwasher has a button-operated control panel, as illustrated below. To select a wash program or option,
simply press the appropriate button. After you have selected the desired wash program and options, press Start/
Stop
.
PO PO PO PO POWER BUTT WER BUTT WER BUTT WER BUTT WER BUTTON ON ON ON ON
Press this button to turn the main power to the unit on and off. Refer to the illustration above to see the
location of the power button.
ST ST ST ST STAR AR AR AR ART/ST T/ST T/ST T/ST T/STOP BUTT OP BUTT OP BUTT OP BUTT OP BUTTON ON ON ON ON
Once you have selected the wash program and temperature option, press this button to start the dishwasher. (Make
sure the door is securely closed.) The indicator light around the button will glow progressively as the program goes
through each cycle. When the program is complete, the lights will glow all the way around the button.
OPTIONS OPTIONS OPTIONS OPTIONS OPTIONS
To select an option, simply press the appropriate option button. The options are described below.
OPERA OPERA
OPERA OPERA
OPERATING INSTR TING INSTR
TING INSTR TING INSTR
TING INSTRUCTIONS UCTIONS
UCTIONS UCTIONS
UCTIONS
Program Times
The program times may not always be the same because of variations in the household hot water temperature. The
dishwasher heats the water to the proper temperature for the program selected; so if the temperature of the water
entering the dishwasher is too low, the dishwasher will run longer because it takes longer to heat the water. Raising
your water heater setting could help to shorten the cycle times.
“The Normal Wash program is
used for energy testing and
should be used for normal or
lightly soiled loads. When
washing dishes that are more
heavily soiled, use a longer
program with higher
temperatures such as Heavy
Wash.”
Program button
Program
indicator
lights
Start/Stop button
Program progression
indicator lights Temperature
button
Power button (on the top side of the control panel)