Quick Start Guide
We know you’re excited about owning an ASKO dishwasher and you’re anxious to get started, so here’s a brief summary of the
operation procedures. The page references in this guide refer to the
Use and Care Guide. To get the most out of the features of your
new dishwasher, we recommend that you read the
Use and Care Guide.
Model 1485
Touchpad Controls
Press one of these touchpads to select a program.
Indicator Lights
These lights glow red to
indicate the program you
have selected.
LED Window
The LED window displays water temperature,
program run time and fault codes.
Heat fan dry
Press this touchpad to activate
the heating element during the
drying cycle.
UNDERST
UNDERST
UNDERST
UNDERST
UNDERSTANDING
ANDING
ANDING
ANDING
ANDING THE INDICA
THE INDICA
THE INDICA
THE INDICA
THE INDICAT
T
T
T
TOR LIGHTS
OR LIGHTS
OR LIGHTS
OR LIGHTS
OR LIGHTS
When the dishwasher has finished, all of the indicator lights will come on. The lights will remain on until you open the door. When
you open the door, the indicator light for the wash program you last used will come on. If you used the heat dry option, that light will
come on, too.
If the lights flash in an alternating pattern after you have started a program, this usually means the dishwasher door is not closed
securely.
If all of the lights on the control panel flash in sequence, this means the machine has detected an overfill. (See page 7.) Should this
happen, call the ASKO Advisory Center.
This touchpad activates the heating element during the drying cycle to speed up the drying process.
Hea
Hea
Hea
Hea
Heat f
t f
t f
t f
t fan dr
an dr
an dr
an dr
an dryyyyy
PROGRAMS
PROGRAMS
PROGRAMS
PROGRAMS
PROGRAMS
Your ASKO dishwasher has three wash programs, a rinse and hold option and a heat fan dry option. Press the touchpad to select
the desired program and option.
Pots and pans
For the heaviest soiled loads, such as pots, pans,
casseroles, etc.
Normal
For normal wash loads.
Rinse and hold
To rinse dishes that you plan to wash later that
day.
Quick
For lightly soiled loads. Items such as fine china
and crystal can be washed in this program, but
your should turn the heat dry off.
THE CONTR
THE CONTR
THE CONTR
THE CONTR
THE CONTROL P
OL P
OL P
OL P
OL PANEL
ANEL
ANEL
ANEL
ANEL
Model 1485 has a touchpad control panel, as illustrated below. To select a wash program or the heat fan dry option, simply press the
appropriate touchpad. When you press a touchpad, a red indicator light at the upper left of the touchpad glows to show that you
selected that program.
Rinse
and
hold
Norm
wash
Heat
fan
dry
Pots
and
pans
CHANGING A PROGRAM
CHANGING A PROGRAM
CHANGING A PROGRAM
CHANGING A PROGRAM
CHANGING A PROGRAM
If you’ve started the dishwasher then decide to change the program or turn off the heat fan dry option, simply press the original
program touchpad for three to five seconds to stop the dishwasher. You can then press the touchpad for the desired program.
