Custom operating time
5 - 120 min
1.
Press
The machine's display lights up and it is ready
for use.
2.
Press
The display shows 005.
3.
Press respectively to set the
desired operating time.
4.
Press
again, the machine will start
and produces ozone during the specified
operating time. Leave the room and return at
the earliest after the specified operating time
and another 2 hours to allow the ozone to
disappear.
Delayed start
1.
Press The display flashes 01h
2.
Press
or
to enter the delay time in hours until the
desired start (1 - 24 hours). The operating time
is always 2h in this mode.
3.
Press again
The display changes to steady light and the
machine will start after the specified delay.
Make sure that no people, pets or plants are in
the room when the machine is to start.
4.
Wait at least 2 hours after decontamination,
to allow the ozone to decompose, before
re-entering the room.
Quick start
2h + cyclic function
1.
Press The machine's display lights up
and it is ready for use.
2.
Press The machine starts and produ-
ces ozone for 2 hours and will then enter the
restart cyclic mode at 24 hour intervals.
3.
Leave the room and wait at least 4 hours
before returning. Open & ventilate any ozone
odour.
4.
N.B. Please press symbol for power off
if the cyclic mode is not required!
Power - starts and turns off the machine
For custom operating time and start
Starts the machine for 2 hours of
operation
Increases operating time
Decreases operating time
USER GUIDE
BEFORE YOU BEGIN
Make sure that no people, pets nor plants are in the area to be treated. Also make sure that the space can be
kept closed during the entire treatment period, and two hours after the treatment itself has ended. This time
is needed for the ozone to be converted back to oxygen. Open and ventilate after completed treatment to
remove any ozone odour. Note that if you experience the ozone smell intrusive even after these two hours,
you should wait a while longer to enter the room.
7
