HARDWARE INSTALLATION
7
The cable modem will look for the proper cable modem signal in the Cable
Television network and process the initial registration. The cable modem is
ready for data transfer after the LED “
STATUS
” is in solid green.
NOTE:
The
RST
button at the rear panel is for maintenance purpose only.
2.2.2 Installation Procedure for USB Interface
Follow the following instructions for proper installation:
Step 1:Make sure your computer meets the system requirements in Section
1.2.
Step 2:Connect a coaxial cable (supplied by the local Cable Television
Company) to the CABLE connector on the modem.
NOTE
: To speed
up the initial cable modem registration process, the coaxial cable
should be connected to the modem prior to the power connector.
Step 3: Connect the USB cable to the
USB
connector on the modem.
Step 4: Plug the power adapter into the
POWER
connector of the modem.
Step 5: Plug the other end of the power adapter into a power outlet.
The cable modem will look for the proper cable modem signal in the Cable
Television network and process the initial registration. The cable modem is
ready for data transfer after the LED “
STATUS
” is in solid green.
NOTE:
The
RST
button at the rear panel is for maintenance purpose only.
Содержание CME063W
Страница 1: ...Wireless Cable Modem User Manual Rev 01 ...
Страница 10: ...HARDWARE INSTALLATION 8 2 2 3 Connecting the Cable Modem to Your Computer ...
Страница 32: ...UNINSTALL THE USB DRIVER 30 Step 4 Click the Yes button Step 4 Unplug the USB cable and click the OK button ...
Страница 49: ...WEB SERVER 47 6 14 SaveCFG You can save configuration parameter to FLASH ...