First Connect the power adaptor to the Wireless Extender, second use one needle
to insert the port of IR IN/OUT to press the Reset button; If the Status and
the HDMI Status Led Light go flash for three times ,it means the Reset action
is finished successfully.
Note: You have to do reset to sender and receive both first, then you can connect
the Sender and receiver again.
SPECIFICATIONS:
HDEX0016M1
HDMI Compliance…………………………………..………………………………….. HDMI1.3/HDCP1.4
HDMI resolution ……………up to 1080P@50/60Hz&SVGA/XGA/WXGA/SXGA/WXGA+/UXGA/
WSXGA+/ WUXGA
HDMI Audio Format……………………………………………………………………………….. LPCM2.0
HDMI Max bandwidth………………………………………………………….……………………...225MHz
HDMI Max baud rate…………………….………………….………………….……………………6.75Gbps
Input/Output TMDS signal ………….……………………………….……………….0.5~1.5Volts p-p(TTL)
Input/Output DDC signal ……………………………………………..……………………. 5Volts p-p (TTL)
HDMI output cable distance………………………………………...
≤
12m AWG26 HDMI standard cable
Antenna type…………………………………………………………..…. External dual 3dBi gain antenna
Wireless
standard………………………………………………………………………...IEEE
802.11a/b/g/n
Wireless Band…………………………………………………………………….. 2.4GHz, 5GHz ISM Band
Max Data rates………………………………………………………………………… 2T2R up to 300Mbps
Transmit Output Power
（
IPEX
）
…………………………………………………….……….……16
±
2dBm
Transmission distance………………………………………………………….up to 100m (in open space)
IR Carrier frequency…………………………………………………………………………………….38KHz
TX/RX Max working current ……………………………………………………….……….…….………. 1A
Power adapter format Input ……......….….…….…….…….…. AC 100V
～
240V 50HZ/60Hz, DC5V/2A
Operating Temperature range ……..…………….……………………………………………. -5 to +45
℃
Storage Temperature range……………………………………………………………………. -20 to +60
℃
Operating Humidity range ………………………….….……….……….10 to 90%RH (No Condensation)
Storage Humidity range………………………….….……….……………5 to 95%RH (No Condensation)
Case Dimension (L x W x H) ………………………………….…………………….127.5x127.5x25 (mm)
Weight …….…………………………….………………………………………….………..TX175g/RX170g
