QUICK SET-UP
The following steps will quickly lead you through set-up and
adjustments for the projector connected to a single
computer. For connection to a second computer, please
consult the Making the Connections section. The sequence
numbers refer to the drawing of the quick set-up.
SETTING UP
POWER OFF (1)
Switch off all equipment before
connecting.
COMPUTER (2)
Connect the computer to the
COMPUTER 1 (or 2) connector
using the computer cable.
Use applicable computer and
monitor adapters if needed.
SOUND (3)
Connect sound from the computer
using a standard 3.5-mm stereo
jack line cable (not supplied).
MOUSE (4)
When your computer is attached to
COMPUTER 1, connect the mouse
cable to COMPUTER 1 MOUSE.
Use an applicable mouse adapter
at the computer end.
When attached to COMPUTER 2,
connect the USB cable to
COMPUTER 2 USB MOUSE.
VIDEO (5)
Connect video. Use a SCART
adapter if needed.
MAINS (6)
Connect the power cords to the
various equipment.
POWER ON (7)
First switch on the projector, then
the source equipment for correct
recognition of the projector.
USE
ZOOM , FOCUS AND POSITION
Zoom the lens for desired image size,
focus the lens for an optically sharp
image and tilt the unit using the
integral adjustable feet to position the
image on screen.
RESET
Press RESET to automatically adjust
for position, width and stability.
RESET is automatically invoked when
a new source is connected.
CONTRAST AND BRIGHTNESS
Adjust CONTRAST and
BRIGHTNESS as preferred.
ENGLISH
