Ask Proxima Impression 1280, Руководство пользователя

Страница: 29 / 56

USER GUIDE SXGA LCD PROJECTOR
29
10.1 AUTOMATIC SETUP
The projector always seeks to adjust the projected image automatically.
The user may also at any time invoke the autoadjust function by pressing
RESET. When auto is operating, the image will be shifted to different
positions on screen for about 5 seconds before it is stabilized.
10.2 TRACKBALL REMOTE CONTROL
The remote control enables both set-up of the projector and control both of
the projector and the computer mouse pointer during operation.
The mouse functionality duplicates the local computer mouse without the
need for any special software drivers.
10.3 MENU SYSTEM
The menu system is designed so that it may be invoked and overlaid at
any time with any image projected. When invoked, the menu system will
not interrupt the display of the underlying image. The hierarchical design,
with a main menu and sub-menus, provides a logical approach to access
the various functions. The localization in the upper left corner and the
moderate size of the menus does not block much of the view of the image
displayed. Several languages are selectable to suit international users from
east and west.
10.4 OSD SYSTEM
The OSD (On Screen Display) is used to echo user controls for positive
feedback. The OSD is active both within the menu and with direct controls.
The OSD should not be confused with the menu system, the latter being
used to gain access to controls, while the OSD merely indicates the actual
operation. The OSD may be selected or deselected in the menu.
10.5 SET-UP MEMORY
The various user selections and settings that are made with the remote
control, the projector keypad and the menu system, are automatically
memorized for future reference. Most settings are related to the actual
source in use, so when switching between sources, or between modes
within sources, the individual settings are recalled accordingly.
The memory can store up to 40 different sources and mode
characteristics. Some sources are predefined, while the remaining are
available for customer set-up. See the compatibility list in the Technical
Data section.