20
Displaying video
Remove the lens cap.
Toggle the
Power
switch on the side of the projector to the
On
position.
The LED flashes green and the fans start to run. When the lamp comes on,
the start-up screen is displayed and the LED is steady green. It can take a
minute for the image to achieve full brightness.
? No start up screen?
Get help on page 23.
Plug in and turn on your video device.
The video device’s image should appear on the projection screen. If it
doesn’t, press the
Video
button on the keypad.
? No image?
Try pressing the
Source
or
Auto Image
Get help on
page 23.
Adjusting the image
Adjust the height of the projector by pressing the release button to extend
the foot.
Rotate the leveling foot at the rear of the projector, if necessary.
Position the projector the desired distance from the screen at a 90 degree
angle to the screen.
See page 45 for a table listing screen sizes and distances to the screen.
remove lens cap
toggle Power switch
turn on video device
adjust height
elevator
foot
rotate
leveling
foot
release button
adjust distance
Содержание C110
Страница 1: ...Projector USER S GUIDE USER S GUIDE PM Page 3 ...
Страница 50: ...rojector PM Page 2 ...