8
Copyright (C) 2009-2012 Reserved by ASIX Electronics Corporation
MCS9865 DOS Configuration Tool
User Guide
6.
Serial/Parallel Ports Loopback Test
Run "
gemdosin -t
" command to test MCS9865 Serial or Parallel Ports.
Note that need to connect external loop back connectors to the serial and parallel ports before
running this test.
COM1 exists
COM2 exists
COM3 exists
COM4 exists
LPT1 exists
LPT2 exists
PCI device configurations….
Found Moschip Semiconductor pci devices 9865(1000A000) Rev00 on Bus01 Slot00
SerialPort1 at B800 : TEST RESULTS PASSED.
Found Moschip Semiconductor pci devices 9865(1000A000) Rev00 on Bus01 Slot00
SerialPort1 at B400 : TEST RESULTS PASSED.
Found Moschip Semiconductor pci devices 9865(2000A000) Rev00 on Bus01 Slot00
PrinterPort1 at B000 : TEST RESULTS PASSED.
Detected 3 pci device(s)
Loopback Connectors:
1.
Serial Loop back connection :
Female DB-9 connector – Rear view
2.
Parallel Loop back connection::
Male DB-25 connector – Rear view
