5
Copyright (C) 2009-2012 Reserved by ASIX Electronics Corporation
MCS9865 DOS Configuration Tool
User Guide
4.
Installation Procedures
The following procedure explains how to install MCS9865 serial and parallel I/O ports on DOS.
Step 1:
Run "
gemdosin
" to confirm Device detection. (Eg. MCS9865)
Following information is displayed For 2 Serial and 1 Parallel Port
Gemini DOS installer version 1.0.0.4 dated 03-MAR-2009
PCI Device Configurations...
Found Moschip Semiconductor pci device 9865 (1000A000) Rev00 on Bus03 Slot00
Found Moschip Semiconductor pci device 9865 (1000A000) Rev00 on Bus03 Slot00
Found Moschip Semiconductor pci device 9865 (2000A000) Rev00 on Bus03 Slot00
Detected 3 pci device(s).
==========================
No COM/LPT port found.
==========================
Step 2:
Run "
gemdosin -a
" command to add MCS9865 ports on DOS platform. On Successful
installation, information is displayed as below:
Gemini DOS installer version 1.0.0.4 dated 03-MAR-2009
PCI Device Configurations...
Found Moschip Semiconductor pci device 9865 (1000A000) Rev00 on Bus03 Slot00
SerialPort1 at E480
Found Moschip Semiconductor pci device 9865 (1000A000) Rev00 on Bus03 Slot00
SerialPort1 at E800
Found Moschip Semiconductor pci device 9865 (2000A000) Rev00 on Bus03 Slot00
PrinterPort1 at EC00
Detected 3 pci device(s).
==========================
COM1 added at E480 (IRQ 10)
COM2 added at E800 (IRQ 11)
LPT1 added at EC00 (IRQ 5)
==========================
