1408201627 Rev G
05 August 2015
FILLING THE SOAP BOTTLE AND PRIMING THE SOAP DISPENSER
FILL
STEP 2 - PRIMING THE SOAP DISPENSER
1
2
2
Press and hold the fill button
located on the EZFILL™ soap
dispenser pump assembly
until soap starts dispensing
from the spout.
Optionally press (once) the
fill function on the soap
dispenser remote control
while pointing LED at sensor.
See SETTINGS ADJUSTMENT
in 0390-R operation manual.
9
STEP 1 - FILLING THE SOAP BOTTLE
1
Remove the soap bottle from the
EZFILL™ soap dispenser bracket
and pour liquid soap into container
until it is full. Refer to ‘Technical
Data’ section of this manual for
soap specifications. (Page 5)
Should any soap spill over
the outside of the bottle,
clean it thoroughly. Replace
clean soap bottle into original
position in the EZFILL™ soap
dispenser bracket.
press
press