1408201234 Rev J
05 August 2015
6
INSTALLATION
STEP 1 - INSTALLING THE EZFILL™ SOAP DISPENSING SYSTEM SOAP DISPENSER
1
2
3
4
Drill a hole in the counter top at the
designated location.
Remove and retain the basin nut and
the gasket from the base of the soap
dispenser body, sliding completely
over and off the soap tube, Com and
Power Cables.
Place the soap dispenser shank through
the escutcheon flange (with
O
-ring
down) into the hole in the counter top.
Slide the gasket, disk and nut over the
black soap tube and both cables and
thread onto the shank and secure it to
deck underside.
Fix the pump to the desired location by
securing the support with the supplied
screws.
For ease of installation preference,
optionally swap steps 3 and 4 while
ensuring pump is within reach range of
Com cable.
Black Nylon 1/4” dia. (Ø6) tube 36” (914)
long is supplied permanently attached
to dispenser head.
Assemble the tube to the connector
on pump by pushing it on(provided on
end of black tube).
Plug the Com cable into the Socket
cable (See Step 8)
MAX 1-3/16”
(Ø30)
MIN 1-1/32”
(Ø26)
36” (914)
tube length
1-1/8” Dia (Ø28)Recommended hole size
36” (914)
tube length
