Verify/Change Setup (RS-232)
You will need to initially configure the EtherLink/2 for your specific IP address and
serial port parameters. Once you have the IP address configured for your network,
you can change the parameters by connecting to the EtherLink/2 using Internet
Explorer.
Switch
IBM Compatible
Ethernet
Power
9-30 Vdc
)
Null
RS-232
COM1
RS-232
1 2 3 4
1) Connect ASI EtherLink/2 to Power
2) Set DIP switches SW-1=ON, SW-2,3,4=OFF
3) Connect RS-232 (typically COM1) through Null Modem (Female-Female) to
EtherLink/2 Serial DB9
4) Run HyperTerminal and Connect [as configured]
DOC-1643 (2008-09-16)
EtherLink/2 User Manual
Configuring EtherLink/2
•
1-13
