Ashton RHYTHMVX, Руководство пользователя

Страница: 8 / 28

PAGE 8
ASSEMBLY
3. ATTACHING THE SNARE PAD:
i) Adjust the clamp position
then tighten the wing nuts
on the clamp.
ii) Use a hexagon key to
loosen the screw of the
clamp holder.
iii) Insert the metal rod into
the clamp holder and
adjust the position.
iv) Use a hexagon key to tighten the screw of
the clamp holder.
v) Attach the snare pad to the metal rod and adjust
the position, then tighten the screw on the snare pad.
4. ATTACHING THE DRUM MODULE:
Drum module comes pre-assembled, you will need to attach this to the clamp on the bar
above the floor tom by sliding the module arm into clamp and tightening.
You can adjust the position of the module by loosening the clamp and sliding it along the bar
to wherever you desire.
SETTING UP THE