ashtech Z-FX, Руководство по эксплуатации и справочник

Страница: 28 / 94

16 Z-Surveyor & Z-FX Operation Manual
The voltage input range is 10-28 volts, with a power rating of 10 watts.
Port (Fischer) Connectors
Figure 2.4 represents the pin layout for all the serial ports.
Table 2.4 provides the serial port pinout description.
WARNING
Do not connect or disconnect power or signal cables from the Z-Surveyor
while power is applied. Possible injury and/or equipment damage may occur.
Figure 2.4: Serial Port Pin Layout
Table 2.4: Serial Port Pinout Description
Pin Description
1 12 volts output
2 Ground
3 Clear To Send input
4 Request To Send Output
5 Receive Data input
6 Transmit Data output
7 This pin has the Event Marker input and the One Pulse Per Second
output for ports B and C respectively. For ports A & D, do not
connect any signals. These pins are for factory use only.