ashtech Reliance FS/2, Руководство по эксплуатации

Страница: 48 / 186

32 Reliance with FS/2 Field Operations Manual
3. Press F1 (FDF) to call the Feature File Selection screen, Figure 3.8;
FDF
is
the DOS filename extension for feature files.
The FS/2 comes pre-loaded with one feature file,
EXAMPLE.FDF
. You
must create your own user-specific feature files on a PC using the Processor
software, and then download the feature files from the PC to the FS/2.
4. Highlight a feature file using the arrow keys, then press F4 (OK) to return to
the Session Setup screen.
5. In the Session Setup screen, if the project uses a waypoint file, press F2
(WPT) to call the Waypoint File Selection screen, Figure 3.9.
Figure 3.8: Feature File Selection Screen
Figure 3.9: Waypoint File Selection Screen