ashtech Reliance FS/2 Скачать руководство пользователя страница 180

Страница: 180 / 186

F-4

Reliance with FS/2 Field Operations Manual

Supported Protocols

Table F.2 lists the protocols supported by the Customer Support BBS.

The preferred protocols are ZMODEM, SEAlink, YMODEM.

Table F.2: BBS Protocols

Protocol

Description

XMODEM

Widely supported, uses 128-byte blocks. Good for moderately
noisy lines. May cause file integrity problems by rounding.

XMODEM-1k

Uses 1024-byte blocks. Supposedly better for 2400 baud+. May
cause file integrity problems by rounding.

YMODEM

Also known as YMODEM Batch, passes filename and size,
eliminating rounding problems. Capable of multiple file transfer
(batch).

YMODEM-G

Fast protocol for use only with error-free data links. Not recom-
mended.

SEAlink

Passes filename and size, eliminating rounding problems. Capa-
ble of file transfer (batch). Good for noisy line conditions and
links where delays occur (satellite-based long distance, or
packet-switched networks).

KERMIT

Slow, but works with almost any transmission medium.

SuperKERMIT

Same as KERMIT, but faster. Good for noisy line conditions and
where delays occur (satellite-based long distance, or packet-
switched networks).

ZMODEM

Newer protocol that supports batch and exact file size. Good for
noisy conditions. Includes all ZMODEM-90Ô extensions.

ASCII

Only for users with no other protocols available. No error check-
ing, not recommended.

Содержание Reliance FS/2



























































































































































































Результаты поиска

Содержание Reliance FS/2

Отзывы:

Бренды по названию

Популярные бренды

ashtech Reliance FS/2, Руководство по эксплуатации

Результаты поиска

Содержание Reliance FS/2

Отзывы:

Бренды по названию

Популярные бренды