Engl
is
h
2
•
Then push the door against the receiver case and rotate
the two screws back in their initial positions to seal the
battery compartment.
Turning the
Receiver On
•
Press the Power key
[1]
for a couple of seconds until you
feel a vibration in your hand, then release the key.
Let the receiver run its boot sequence. Wait until the
screen displays the Windows Mobile Home screen.
The operating system used in the receiver is Microsoft
Windows Mobile Professional version 6.5. For more
information on how to use the different applications, you
can visit the Microsoft web site at:
http://www.microsoft.com/windowsmobile/en-us/help/v6-5/
Basics.aspx
Depending on how long your product was stored in its
package before being shipped to you, the remaining power in
the battery may be too low to allow the receiver to operate for
your entire working session. For this reason, the first thing to
do is to check the
battery charge status
:
•
Press the Windows key
[2]
•
Using the stylus or your finger, tap successively on the
following function icons on the screen:
Settings
,
System
and
Power
(you need to drag the stylus upward on the
screen to scroll down to the
Power
icon
•
The
Power
function shows the status of the battery. If the
remaining power is greater than 50%, then you can use
the receiver without having to charge the battery first (with
50% of remaining charge, you can use the receiver for
several hours). Skip the next section and go to
Adjusting
Backlight Level and Idle Time on page 4
.
If it less, Ashtech recommends you first charge the battery
as explained in
Using the AC Adapter to Charge the
Battery on page 3
.
[1]
[1]
[2]
[2]
