ashtech HDS800, Справочное руководство

Страница: 175 / 678

159
Web Server Help Files Collection
Configuration Tab
External Radio
Use this area to set the external radio used by a base. After
you select a radio type from the
Type
field, new fields will
Automatic/
Manual
Enable this option if you want the internal radio to
be powered on automatically when the receiver is
powered on. If this option is disabled, the internal
radio will be powered on only on request from the
receiver.
RDP,PAR
Type
This field reports the type of internal radio currently
used (a read-only field):
• No radio
• Auto-detecting...: The receiver is currently trying
to identify the type of radio used. You need to
refresh the whole screen (F5 key) to see if it has
been able to come up with an answer.
• U-Link Rx: The internal radio was detected as a
U-Link Rx radio.
• Pacific Crest: The internal radio was detected as
a Pacific Crest radio.
-
Channel
Choose one of the available channels for this
radio. (The channels are read from the radio when
opening the Web Server Configuration tab.)
RDP,PAR
Protocol
Choose one of the protocols below, depending on
the type of radio transmitter used at the base:
• DSNP (for radio transmitter P/N 800986, i.e. the
old U-Link model first introduced in 1996)
• Transparent (for all other radio transmitters)
• Trimtalk for PacCrest
RDP,PAR
Airlink Speed
Choose one of the baud rates below:
• 4800 (mandatory to receive base data from
radio transmitter P/N 800986)
• 7600
• 9600 (base data from Pacific Crest radio trans-
mitter)
• 19200 Bd for PacCrest
RDP,PAR
Sensitivity
Set the reception sensitivity of the internal radio
used (High, Medium, Low).
RDP,PAR
Current
Power
Scrambler
Set the scrambler setting (on or off), for PDL only RDP,PAR
FEC Set the FEC setting (on or off), for PDL only RDP,PAR
Parameter Designation $PASHS