ashtech GG Surveyor, Справочное руководство

Страница: 196 / 256

178 GG Surveyor GPS+GLONASS Reference Manual
BAS: Set Receiver as Differential Base Station
$PASHS,RTC,BAS,x
Set the receiver to operate as an RTCM differential base station, where x is the port
through which corrections will be sent.
Example: Set to differential base mode using port B
$PASHS,RTC,BAS,B<Enter>
M36: RTCM Type 36 Message
$PASHS,RTC,M36,s
Define RTCM type 36 message, where s is a character string up to 90 characters long
that will be sent from the base to the remote. Used only if message type 36 is enabled.
Example: Define RTCM message "This is a test message"
$PASHS,RTC,M36,This is a test message<Enter>
MAX: Set Maximum Age of RTCM Differential Corrections
$PASHS,RTC,MAX,d
Set the maximum age in seconds of an RTCM differential correction above which it
will not be used, where d is any number between 1 and 1199. Default is 60. Used
only in REMOTE mode.
Example: Set maximum age to 30 seconds
$PASHS,RTC,MAX,30<Enter>
MSG: RTCM Type 16 Message
$PASHS,RTC,MSG,s
Define RTCM type 16 message, where s is a character string up to 90 characters long
that will be sent from the base to the remote. Used only if message type 16 is enabled.
Example: Define RTCM message "This is a test message"
$PASHS,RTC,MSG,This is a test message<Enter>
OFF: Disable Differential Mode
$PASHS,RTC,OFF
Disables base or remote differential mode.
Example:
$PASHS,RTC,OFF<Enter>