Items
Probable reason
Troubleshoo ng
Switch
don't
work
1.Use wrong power supply.
1.Use a speci
fi
c power supply.
2.The
plug
is
poorly
connected.
2.Check
the
plug
and
reconnect
it
properly if necessary.
3.
The
cable
connec ng
the
motor
and
power
supply
poorly
connected
3.
Check
the
cables
between
back
and
seat, reconnect them if
necessary.
4.The
above
ac ons
are
invalid
4.Product
is
damaged
and
please
contact the retail store.
Massage
don't
work
1.
Massage
key
is
not
pressed
1.
Press
key
6,
to
func on
the
massage.
2.
Air
tubes
are
poorly
connected
2.
Check
the
air
tubes
between
back
and
seat, reconnect them if
necessary,
make
sure
snap
joint
is buckled up.
3.The
above
ac ons
are
invalid
3.Product
is
damaged
and
please
contact the retail store.
Heat
don't
work
1.
Hea ng
key
is
not
pressed
1.
Press
key
5,
to
turn
on
the
LED indicator.
2.The
above
ac ons
are
invalid
2.Product
is
damaged
and
please
contact the retail store.
All Rights Reserved.
Page
4
Of
6
Key Descrip on:
USB output: 2.1a (max) / 5V, zero power consump on (output 0W without USB).
Key 1: power recline open;
Key 2: one bu on reset (home), power recline and headrest closed, hea ng and massage also stopped;
Key 3: headrest open;
Key 4: headrest closed;
Key 5: press once to heat (hea ng indicator light is on), then press once to stop hea ng (hea ng indicator light is off);
Key 6: press once to start massage, and then press once to stop massage.
Heat Pad Features:
When “Key 5” is pressed, the hea ng will start to work. If there is no ac on to stop this manually, it will automa cally
turn off a er 30 minutes. To restart, just turn back on following above steps. The temperature will get to about 140 – 158°F (60 – 70°C)
Massage Features:
The massage will func on through 3 se ngs for 1 cycle; Steady, Wave and Pulse. This is the normal cycle and it is not
able to select only 1 of the se ngs. Each se ng is approximately 5-8 minutes long. See the descrip on for each se ng below:
1. Steady – A rota on of 2 air bags will fill while the opposite 2 are empty and repeat filling and emptying for this se ng.
2. Pulse – The bags will par ally fill then rapidly fill to provide a feeling of pressing on your back. These will con nue to fill and empty in
cycles un l the se ng is finished.
3. Wave – The bags will fill more in a cycle and slower to provide pressure during the cycle as another feature represen ng massage. The
will revert in the opposite direc on as they are emp ed.
When pressing “bu on 6”, the massage airbags will start. To turn off, press “bu on 6” again. If no one turns off, the massage will
complete its cycles and turn off automa cally a er 20 minutes. If desired to restart, turn back on following above steps.
Frequently asked ques ons
U2800413
Apr 15. 2020
